8.5mm Hunt Double Flopper Shaft

The concept of ‚ÄúBlackout” shaft
It’s a shaft very strong, with top level finishing as well as all the Hunt shafts.
Its name comes from the maximum stopping power on the fish (thanks to the ‚Äòtrue’ tricuspid point and the barb not recessed, if hit in its vital points you have more chances to kill the fish with one shot); maximum hold of the barb on the fish, penetrating as a double barb thanks also to the not sticking out welded pin.
The barb is very heavy and since it’s ‚Äòunder’, it alway open itself.

Technical description of Blackout shaft
The Blackout shaft is made in 17.4 PH rebored
Is made by 17.4 PH bars certificated by steelwork; straight and smooth
The Blackout shaft is C.N.C. machined
The Blackout shaft has 4 fins, 3 backwards and one for preloading for diameters 7, 7.5, 8, 8.5, 8.75, 9, 9.5, 10
The Blackout shaft stands out for fins position, like shark fin, at 60/90/120/360 mm from the bottom of the shaft.
The fins have no corners and are perfect both for dyneema use and for othe kind of wishbones
‚ÄúShark fin” tips are TIG welded and create a stiffening bridge on the shaft, inscreasing its balistic performances.
It’s a shaft for powerful spearguns, it has a sharpen tricuspid point and the 1.2mm thick barb, very strong and mounted with a special pin, high strength d. 2.5 mm TIG welded in a very accurated way.
The barb is very smooth and polished for fish integrity.
The welded pin allows to have the maximum hold because the welding itself creates a reticular connection between barb and pin, avoiding the ovalization of the hole, also with wide loads.
The barb is supplied ‚Äòmono under’ only and it does stick out as a recessed double barb.
The barb blocks while opening.
Preloading fin with 3.5 hole welded with continuous bead and shark fins 4.5 height.